News & Blog

Will My Cooler Fit LGA 1851? NZXT Kraken Socket Compatibility
Your LGA 1700 bracket already fits LGA 1851. Here's which NZXT coolers support the socket and what older Kraken X and Z owners need.
Weiterlesen
How to Connect RGB Fans: Motherboard, Controller or Control Hub
Motherboard header, controller or Control Hub? Here's how every current NZXT RGB fan connects, what the 8-pin cable does and the one wiring mistake to avoid.
Weiterlesen
Is a Push-Pull Radiator Setup Worth It?
A second row of radiator fans sounds like free cooling. Here's what push-pull gains, how much space it needs and when a bigger radiator does more.
Weiterlesen
How to Put a GIF on Your NZXT Kraken Screen
Your Kraken screen can show any GIF you like. Here's how to set one up in NZXT CAM, make it fit the screen and pair it with live temps.
Weiterlesen
NZXT CAM Not Detecting Your Kraken or RGB Controller? How to Fix It
If CAM cannot see your Kraken or RGB controller, the cause is usually one of a few things. Work through these seven steps in order to find which one.
Weiterlesen
How to Install a Graphics Card: Remove, Seat and Power It
Check it fits, power down the right way, swap the card and connect power without mixing PSU cables. A step-by-step graphics card install.
Weiterlesen
Should Your AIO Pump Go on CPU_FAN or AIO_PUMP?
The right header depends on whether that 3-pin cable powers your pump or just reports its speed. Here's where every Kraken's pump and fans should plug in.
Weiterlesen
Is My PC Overheating? Safe CPU Temperatures and How to Check
High temps under load can be normal. High temps at idle aren't. Here's how to read your CPU temperature, what's safe and what to fix when it runs hot.
Weiterlesen
How to Install an AIO Liquid Cooler, Step by Step
An AIO install comes down to the same six steps every time. Here's each one, from the backplate to the BIOS setting that keeps your pump healthy.
Weiterlesen
Wie viel Watt muss mein Netzteil haben?
Addiere die Werte von CPU und GPU plus einen Zuschlag für den Rest des Systems und wähle dann ein Netzteil, bei dem deine typische Last etwa in der Mitte seines Bereichs liegt.
Weiterlesen
Wie viele Gehäuselüfter brauche ich?
Drei bis vier gut platzierte Lüfter mit etwas mehr Einlass als Auslass reichen für die meisten Gaming-Builds – die Platzierung zählt mehr als die Anzahl.
Weiterlesen
240, 280, 360 oder 420 mm AIO: Welche Radiatorgröße solltest du nehmen?
Für die meisten Gaming-Builds ist eine 280- oder 360-mm-AIO die beste Wahl, 240 mm für kompakte Builds und 420 mm, wenn das Gehäuse Platz hat.
Weiterlesen
